FILTER RESULTS BY:

Search By Product Type

Search Products:

Search By Product Type

Throttle Body Replacement

After mounting the part the system needs adjustment. This Process you can manage by yourselves or by a VAG or MAHAG Diagnosis tool.
Our company advises you use a BOSCH SERVICE point. Or similar

If you want to make this adjustment by yourself please make it by following the commands.

  1. Pull out the dash key and disconnect the minus terminal of your battery
  2. Wait 5 minutes
  3. Now Re-connect again the minus terminal to the battery and turn the ignition key until the red light Illuminates on the dash board BUT DO NOT START THE ENGINE
  4. Wait 5 minutes
  5. Now start engine and the process is finished

If this is not working please check the ECU. Very often the mistake is in ECU which is at fault and not the Throttle body

If the ECU is functioning correctly then the Throttle body is faulty.

The above fitment details are for guidance only, and should not be used as an official fitting Instruction.

While we make every attempt to insure this information is complete and accurate, it is impossible to account for every scenario. Please consult with a local technician before attempting to perform any work you are not qualified to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage or personal injury

Free UK Delivery on all products!

Check out our expert product advice

Sign up to our newsletter!

    Copyright © 2024 Daytona GB limited - discount car parts. Web Design by Echo.

    website uptime string